Lost or need to replace your 2005-2006 Toyota Camry remote key fob? Don’t worry, programming a new key fob for your Toyota Camry can be a straightforward process you can do yourself, potentially saving you a trip to the dealership and unnecessary expenses. This guide will walk you through the steps to program your 2005-2006 Camry remote car key fob, ensuring you regain convenient access to your vehicle.
Before you begin, it’s crucial to ensure you have the correct replacement remote. The FCC ID number on your new fob must match the one on your original or replacement remote. Using the wrong FCC ID can prevent successful programming.
This programming procedure involves different modes, allowing you to add new remotes, rewrite (erase and reprogram all), confirm existing programmed remotes, or prohibit all remotes from working. For most users replacing a lost or adding a new remote, the “Rewrite mode” is recommended to start fresh and avoid potential conflicts with previously programmed remotes.
Here’s a step-by-step guide to program your 2005-2006 Toyota Camry remote car key fob using the Rewrite mode:
Programming Steps:
-
Start with the Basics: Ensure the driver’s door is open and unlocked. Remove the key from the ignition.
-
Key Insertion Sequence (1): Insert and remove your key from the ignition switch twice within 5 seconds.
-
Door Cycling (1): Within 40 seconds of step 2, close and open the driver’s door twice.
-
Key Insertion Sequence (2): Immediately insert the key into the ignition and remove it.
-
Door Cycling (2): Within 40 seconds of step 4, close and open the driver’s door twice again.
-
Key Insertion (Mode Selection): Insert the key into the ignition one last time.
-
Door Close: Close the driver’s door.
-
Ignition Cycling for Rewrite Mode: Now, you need to select “Rewrite mode”. Turn the ignition switch from “Lock” to “On” and back to “Lock” twice at approximately 1-second intervals.
-
Key Removal: Remove the key from the ignition.
-
Mode Confirmation: The power door locks should automatically cycle “lock” to “unlock” twice, confirming you have entered “Rewrite mode”. If you observe a different number of cycles, you may have inadvertently selected a different mode and might need to repeat the process.
-
Remote Programming: Within 40 seconds of the door lock confirmation:
- Press and Hold: Press and hold both the Lock and Unlock buttons on your remote transmitter simultaneously for 1 to 1.5 seconds, then release.
- Lock Button Press: Within 3 seconds of releasing the buttons in the previous step, press and hold the Lock button on the remote for more than 1 second, then release.
-
Programming Confirmation: If the 2005 2006 Camry Remote Car Key Fob Programming is successful, the power locks will cycle “lock” to “unlock” once. This indicates that the remote has been successfully programmed. If the locks cycle twice, it indicates a problem. Double-check that you have the correct remote with the matching FCC ID and repeat the procedure carefully.
-
Programming Additional Remotes (Optional): If you have multiple remotes to program, repeat steps 11A and 11B for each additional remote within the 40-second window.
-
Exit Programming Mode: Open the driver’s door to finalize and exit the programming mode.
Understanding Programming Modes:
As mentioned, there are different modes available. While “Rewrite mode” is generally recommended, understanding the others can be helpful:
- Add Mode: Used to program an additional remote without erasing previously programmed ones. To enter Add mode, cycle the ignition switch from “Lock” to “On” and back to “Lock” only once in step 8.
- Confirmation Mode: This mode allows you to verify how many remotes are currently programmed to your vehicle. Enter Confirmation mode by cycling the ignition switch three times in step 8. The power locks will cycle to indicate the number of programmed remotes.
- Prohibition Mode: Used to disable all remote operation of the door locks. Enter Prohibit mode by cycling the ignition switch five times in step 8.
By following these steps carefully, you should be able to program your 2005-2006 Toyota Camry remote car key fob and restore the convenience of keyless entry. Always double-check your remote’s FCC ID and ensure you follow each step precisely for successful programming. If you encounter difficulties, consulting your Toyota Camry owner’s manual or seeking assistance from a professional locksmith or mechanic is recommended.
