97 Town Car Key Fob Programming: A Simple Step-by-Step Guide

Lost your key fob or need to program a new remote for your 1997 Lincoln Town Car? Programming your key fob at home is easier than you might think, and you don’t need any special tools. This guide will walk you through the simple steps to program your 97 Town Car key fob quickly and get you back on the road with full remote access to your vehicle.

What You’ll Need Before You Start

Before you begin the programming process for your 97 Town Car key fob, make sure you have the following:

  • Your 1997 Lincoln Town Car: Obviously, you’ll need your vehicle present to program the key fob. Ensure it’s parked in a safe and accessible location.
  • Your Key Fob: Have the new or existing key fob you wish to program ready. Make sure it has a working battery. If you need a replacement, you can find a Replacement Fob at Keylessentryremotefob.com.
  • Your Factory Keyless Entry Code: This is a 5-digit code that originally came with your car. You’ll need this code to enter programming mode. If you don’t know it, check the trunk hinge for a sticker containing the code. It’s crucial to use the factory original code for successful programming.

Alt text: A close-up view of a standard key fob remote, commonly used for vehicles, likely a replacement part for a 1997 Town Car.

Step-by-Step 97 Town Car Key Fob Programming Instructions

Follow these instructions carefully to program your 97 Town Car key fob:

Step 1: Initiate Programming Mode

Ensure all doors of your 1997 Lincoln Town Car are securely locked before starting the programming sequence. This is a critical first step.

Step 2: Enter the Factory Keyless Entry Code

Using the keypad on your driver’s side door, carefully enter your 5-digit factory entry code. Press each button firmly and ensure the keypad registers each press. Remember, this must be the original code that came with the vehicle.

Step 3: Confirm Programming Mode Activation

Within 5 seconds of pressing the last digit of your keyless entry code, press the “1/2” button on the keypad. If you have successfully entered programming mode, all doors will lock and then immediately unlock. This lock-unlock cycle confirms that your Town Car is now ready to learn the new key fob signal.

Step 4: Program the First Key Fob

Immediately after the doors cycle, and within 5 seconds of pressing the “1/2” button, press any button on the first keyless remote you wish to program. If the programming is successful, you will see the door locks cycle again (lock then unlock). This indicates that your 97 Town Car has successfully recognized and stored the signal from this key fob.

Step 5: Program Additional Key Fobs (If Necessary)

If you need to program more than one key fob, including existing remotes, you can do so now. Within 5 seconds of the last successful key fob programming (indicated by the door lock cycle), press any button on the next key fob you want to program. Again, the door locks will cycle to confirm successful programming. Repeat this step for any additional key fobs you need to program. It’s important to complete programming all remotes in one session before the keypad light times out; otherwise, you’ll need to repeat the entire process.

Step 6: Exit Programming Mode

To finalize the programming and exit the programming mode, simultaneously press the “7/8” and “9/0” buttons on the keypad. This action will save the programmed key fobs and return your 1997 Lincoln Town Car to normal operation.

Conclusion

Congratulations! You have successfully programmed your 97 Town Car key fob. You should now be able to use your remote to lock and unlock your doors, as well as activate other remote functions your key fob may have. If you encounter any issues or need a replacement key fob, remember to visit Keylessentryremotefob.com for a wide selection of remotes and further assistance.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *